Madsen zodiac Reference Manual page 42

7 Preparing for testing
Probe color
Red
Blue
Green
Yellow
Probe leakage
Stand-alone
If there is a probe leak during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If there is a probe leak during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the leakage indication will remain until you remove the probe
from the ear and try again.
Probe blocked
Stand-alone
If the probe is blocked during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If the probe is blocked during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the blocked probe indication will remain until you remove the
probe from the ear and try again.
42
Status
• The right test ear has been selected
• The device is in idle mode
• The left test ear has been selected
• The device is in idle mode
• The test is running
• Leak
Otometrics - MADSEN Zodiac