Special Tests - Madsen Zodiac User Manual

How to use the menu system
When you press the
selected test protocol is marked up in blue.
• Use the dial or the arrow buttons to select another test protocol, if needed.
• Press the soft-button below the next column to select this column, and scroll to any setting you wish to view or
change.
How to change test settings
1. Start by selecting a protocol.
2. Select the center column.
3. Scroll to the setting you wish to view or change.
4. Select the right-hand column to change the setting.
5. Scroll to the value you wish to use and press the
6. Repeat steps 2 to 5 to change other settings, if needed.
Using test settings temporarily
• If you only wish to use the changed protocol settings temporarily, select the left-hand column, scroll to
porarily
Saving test settings in the protocol
Before you can save test settings in the protocol, you must unlock the protocol: Select
tings
, and set to
again.
• If you wish to save the changed protocol settings permanently, select the left-hand column, scroll to
name]
, and press the
Canceling changed test settings
• If you wish to cancel the settings you have changed, select the protocol and press the
8

Special tests

Zodiac can perform a number of special immittance tests, such as ETF-P and Manual Tympanometry.
These tests are described in detail in the Zodiac Reference Manual.
Accessing special tests
When you press the
You can access the
Otometrics - MADSEN Zodiac
Menu
button, the menu system is shown. The first column is selected: it is shown in gray, and the
OK
and press the soft-button. This will exit the menu system.
Allowed
. If you switch off Zodiac after changing and saving the test settings, the protocol will be locked
Save
soft-button.
Special
button, the available tests are shown.
Probe Check function from the
Select
soft-button.
Special Tests menu.
User Guide
Apply Tem-
Device Settings.. Protocol Set-
>
Save to [Protocol
Reload
soft-button.
19