Fitting A New Probe Tip - Madsen zodiac Reference Manual

17 Service and maintenance
3. Check to see if the sound channels of the probe
tip are blocked. You can fit a new probe tip on
the probe, or use the supplied probe tip
flossing thread to clean the sound channels.
Caution
•
the probe body, as this may cause damage
to the probe.
4. Fit the probe tip on the probe, and twist the
probe ring clockwise to lock the probe tip in
place on the probe.
Probe check
If you have fitted a new probe tip, do a probe check. See
17.4.5

Fitting a new probe tip

If the probe tip has been contaminated or blocked by cerumen or vernix, fit a new probe tip on the probe.
Procedure
Probe body
A.
Probe ring
B.
Probe tip
C.
122
Never clean the sound channels in
Sound channels
A.
Probe check ► 36
.
Otometrics - MADSEN Zodiac