Table of Contents
Advertisement
2 Unpacking and installation
1. To switch on Zodiac, press the
–
In the PC-based versions of the device, the
indicator lights green.
–
In the stand-alone versions of the device, the display
and some function buttons light up.
2. To switch off Zodiac, press the
If needed, switch off the mains supply and disconnect the
power supply from the mains outlet.
2.3.3
Connecting to the PC
To connect Zodiac to the PC, you must install OTOsuite on the PC.
For instructions on installing OTOsuite, see the OTOsuite Installation Manual, which you can find on the OTOsuite install-
ation medium (disk or memory stick).
Caution
•
2.3.4
Configuring the device
Before you start using Zodiac, you can configure the general device settings.
Accessing the device settings
Press the
Menu
Admittance calibration
•
It is necessary to calibrate the admittance before using the device the first time, and subsequently as indicated by the
probe check function. See
226 Hz unit
•
Choose between displaying the 226 Hz admittance data in mmho, or as volume equivalents (ml, cm
Autostart sensitivity
•
Choose between
Sound
•
Choose whether you want Zodiac to issue sounds to indicate various situations (e.g. measurement completed).
Time and date
•
Set time and date for use in the measurement time stamps.
Time format
•
Choose between the 12-hour and 24-hour format.
Date format
•
Choose the date format you prefer.
16
On/Off
On/Off
Use only the USB cable supplied with Zodiac.
Connect the USB cable from the USB socket on the back of the device to a USB socket on the PC. The OTO-
suite Immittance software module automatically detects the device.
button and select the (missing or bad snippet) menu item.
Probe admittance calibration ► 116
Normal
High
and
button.
On/Off
button.
sensitivity.
.
Otometrics - MADSEN Zodiac
3
, or cc).
Advertisement
Table of Contents
