Table of Contents
Advertisement
Probe color
Red
Blue
Green
Yellow
OTOsuite indications
Color
Green
Probe leakage
Stand-alone
If there is a probe leak during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If there is a probe leak during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the leakage indication will remain until you remove the probe
from the ear and try again.
Probe blocked
Stand-alone
If the probe is blocked during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If the probe is blocked during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the blocked probe indication will remain until you remove the
probe from the ear and try again.
8.2
The Quick Check measurement screen
When the measurement starts, you will see the measurement being performed real-time on the screen.
Otometrics - MADSEN Zodiac
Status
•
The right test ear has been selected
•
The device is in idle mode
•
The left test ear has been selected
•
The device is in idle mode
•
The test is running
•
Leak
Status
•
During measurements, OTOsuite shows a green background to the online
values.
8 Testing with Zodiac Quick Check - Stand-Alone
45
Advertisement
Table of Contents
