Table of Contents
Advertisement
Pressure accuracy:
Pump measure direction:
Safety:
Graph units
Unit of admittance graph Y-axis:
Unit of graph X-axis:
Device display
Display:
Resolution:
USB port connector
Type:
Power supply
External power supply
Output:
Input:
Power consumption
Power consumption:
Operating environment
Temperature:
Air humidity:
Air pressure:
Warm-up time:
Altitude correction
The admittance of a cavity depends on the atmospheric pressure. This means that when the atmospheric pressure changes,
the relation between mmho and ml changes. The following table can be used to calculate the difference.
Altitude (m)
Otometrics - MADSEN Zodiac
± 10% or ± 10 daPa, whichever is greatest
For probe tones above 226 Hz and volumes below 0.7 cc, additional ± 10 daPa
can occur.
Positive to negative or negative to positive
Separate safety +530 daPa and -730 daPa ±70 daPa
ml, cc, mmho, µl
daPa, sec
7 inch, 15:9 WVGA
800 x 480 pixel
USB device port
XP Power, type AFM60US24
24 V, 2.5 A
100-240 V AC, 50-60 Hz, 1.5 A
< 70 VA
+15°C to +35°C (59°F to +95°F)
10 to 90%, non-condensing
600 hPa to 1060 hPa
< 10 min. If stored in conditions not within specified operating environment
conditions, the device must warm up for 24 hour before being put into oper-
ation.
Increase in mmho (%)
19 Technical specifications
133
Advertisement
Table of Contents
