Table of Contents
Advertisement
2 Unpacking and installation
2
Unpacking and installation
To install and get started with MADSEN Zodiac and the OTOsuite Immittance module, follow the sequence below:
•
Unpack MADSEN Zodiac (see
•
Install OTOsuite on the PC. See the OTOsuite Installation Manual on the OTOsuite Installation disk.
•
Install MADSEN Zodiac (see
•
Run the OTOsuite Configuration Wizard to connect to and set up communication with MADSEN Zodiac. (See
figuring the Immittance module ► 17
2.1
Unpacking
1. Unpack the device carefully.
When you unpack the device and accessories, it is a good idea to keep the packing material in which they were
delivered. If you need to send the device in for service, the original packing material will protect against damage dur-
ing transport, etc.
2. Visually inspect the equipment for possible damage.
If damage has occurred, do not put the device into operation. Contact your local distributor for assistance.
3. Check with the packing list to make sure that you have received all necessary parts and accessories. If your package is
incomplete, contact your local distributor.
2.2
Storing
If you need to store MADSEN Zodiac before you put it into operation, follow the guidelines below:
•
Store MADSEN Zodiac and accessories in the boxes provided to protect the equipment from damage.
•
Store MADSEN Zodiac and accessories in a dry environment.
Temperature range, humidity and air pressure requirements for storage and handling are listed in
► 129
.
2.3
Installing Zodiac
To ensure safe performance of the device, make sure that MADSEN Zodiac is correctly installed and that the requirements
listed as warning notes are complied with.
Warning notes ► 126
See
Location
Immittance testing is facilitated by a moderately quiet room. A sound cabin or sound treated room is not necessary.
Wall-mounted installation
If you wish to mount MADSEN Zodiac on the wall, see the instructions supplied with the wall-mount installation kit.
Probe
At delivery, the probe is already connected to MADSEN Zodiac.
This also applies if the configuration includes both a Quick Check probe and a diagnostic probe.
We recommend that you carry out a probe check daily to verify that the system measures correctly.
14
Unpacking ► 14
).
Installing Zodiac ► 14
).
.
).
Con-
Technical specifications
Otometrics - MADSEN Zodiac
Advertisement
Table of Contents
