Table of Contents
Advertisement
Stimulus frequencies (Hz)
Noise
Ear
Delete
Probe check
Probe check
On-screen selections
Soft-button
Menu
Otometrics - MADSEN Zodiac
Press these buttons to select the desired pure tone frequency for the reflex
measurement.
You can choose between the following frequencies:
•
•
•
•
(stimulus)
Press this button to select Broadband noise as a reflex stimulus.
This button is placed both on the device and on the probes.
Press this button to toggle the ear selection associated with the current
measurement.The button lights up in the color of the selected ear.
Press this button to delete individual measurements.
Place the probe in the probe check cavity and press this button to carry out
a probe check.
Press this button to select the current function of the soft-button as shown
on the screen just above the soft-button.
•
•
Press this button to display the menu where you can select test setups,
change test settings, create user tests, select print output, and select func-
tions for service and calibration.
0.5 kHz
1 kHz
2 kHz
4 kHz
Menu:
Press the soft-button below the column you wish to go to.
Tympanometry:
Press to toggle between tympanometric curves and to change curve
type.
6 MADSEN Zodiac test controls
29
Advertisement
Table of Contents
