The Quick Check Measurement Screen - Madsen zodiac Reference Manual

11 Testing with Zodiac Quick Check - PC-based
Probe leakage
Stand-alone
If there is a probe leak during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If there is a probe leak during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the leakage indication will remain until you remove the probe
from the ear and try again.
Probe blocked
Stand-alone
If the probe is blocked during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If the probe is blocked during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the blocked probe indication will remain until you remove the
probe from the ear and try again.
11.2

The Quick Check measurement screen

When the measurement starts, you will see the measurement being performed real-time on the screen.
A. Control panel selections
The control panel shows the selections that are enabled for this test.
You can select or deselect the tympanometry sweep, and select Reflex Screening where you can enable or disable the
stimulus types for the test.
84
Control panel selections
A.
Tympanometry graph
B.
Reflex Screening results
C.
Tympanometry results
D.
Otometrics - MADSEN Zodiac