Probe blocked
Stand-alone
If the probe is blocked during testing, this will be shown on the MADSEN Zodiac and OTOsuite screens.
PC-based
If the probe is blocked during testing, this will be shown on the OTOsuite screen.
If you are using the Quick Check probe, the blocked probe indication will remain until you remove the
probe from the ear and try again.
9.1.2
The Quick Check measurement screen
When the measurement starts, you will see the measurement being performed real-time on the screen.
A. On-line values
The on-line values show the current settings and status.
•
Probe tone in Hz
•
Pump speed
•
Sweep direction
•
Current equivalent volume/admittance (678, 800, 1000 Hz probe tone)
B. Tympanometry graph
The graph area shows the tympanometric curves and can rescale automatically to fit the curves.
•
Tympanometric curves
•
Pressure and admittance scales
•
Ear canal volume bar. The ear canal volume is shown to the right of the graph.
Norm area
•
Otometrics - MADSEN Zodiac
9 Testing with Zodiac Diagnostic or Clinical - Stand-Alone
On-line values
A.
Tympanometry graph
B.
Reflex Screening results
C.
Tympanometry results
D.
On-screen selections
E.
51