Table of Contents
Advertisement
2. Remove the spool of the used paper roll.
3. Loosen the paper end edge from the new paper roll.
4. Make sure that the paper compartment is clean.
5. Place the paper roll in the compartment with the loose end opening towards
the back of the compartment and upwards from the bottom of the com-
partment. When you pull the paper upwards before closing the cover, you
will see the Otometrics watermark.
6. Tear off the part of the paper where glue has held the roll together.
7. Make sure that the loose end of the paper roll emerges through the paper
slot.
8. To close the printer cover, press the printer cover into place until the lock
clicks shut.
Storing extra paper rolls
When you store extra paper rolls, make sure that they are not exposed to light, high temperatures or a high humidity
level, as this will decrease their quality.
Otometrics - MADSEN Zodiac
3 The built-in printer
19
Advertisement
Table of Contents
