Etf-I (Eustachian Tube Function - Intact) Testing - Madsen zodiac Reference Manual

E. On-screen selections
Curve selection
Manually adjusting the TPP
Changing tympanogram curve type
Deleting a curve
Results shown
The results are shown as a tympanometric curve traced over
the norm area (if Norm Area is enabled).
The tympanogram can be viewed in four different ways:
• traditional absolute admittance, Y
• traditional baseline compensated admittance, Y
• susceptance, B, and conductance, G; both absolute and
compensated
• component compensated admittance, Y
Note The probe tone shown at the top of the test
•
screen applies to the currently selected measurement
setting, and may not reflect the probe tone setting that
was used for the curve shown.
The actual probe tone applying to the curve shown is shown in
the results table.
9.4

ETF-I (Eustachian Tube Function - Intact) testing

Note This test is available only if MADSEN Zodiac supports diagnostic testing.
•
Otometrics - MADSEN Zodiac
Previous Curve
Press the or
the Reflex Screening and Tympanometry result tables.
Edit TPP
Press the softbutton, use the dial to move the marker to the desired
Done
TPP, and press the softbutton.
Edit TPP
Press the softbutton. Press the
desired type is shown, and press the
Select the curve you wish to delete, and press the
To replace a single measurement, delete a curve and adjust the measurement
selections to redo the single measurement.
tm
tm
9 Testing with Zodiac Diagnostic or Clinical - Stand-Alone
Next Curve
softbutton to select the desired curve in
Change Type
softbutton until the
Done
softbutton.
Delete
button.
57