Table of Contents
Advertisement
5 – Operating Software
5.3.3.5 Video Overlay Setup
➥
To edit these settings, select Configuration
Video Overlay Setup.
The video overlay operates in the similar way as the previous overlay by receiving a video signal
arriving from a user supplied subsea camera and overlaying it with the DeepView for Windows
information specified by the user via the Video Overlay Configuration. The Video Overlay Setup menu
is available via the Configuration options and provides the options illustrated below in Figure 5-12.
The video overlay has two possible modes. The first mode is where a copy of the SDC screen (the
Runview) is overlaid on the video output. This is selected with the "Duplicate Runview" checkbox. The
other mode is where selected information, for example the VRT and target position, are overlaid. The
positions and colours of each of these elements can be fully controlled by the user.
Figure 5-12: Video Overlay Setup
DPN 402196 Issue 4.1
© Teledyne TSS
5- 25
Advertisement
Table of Contents
