User Interface - Teledyne T3VNA Use & Care Manual

1.6 User Interface

Table 1-3 User Interface labels
NO. Name
1 Screen information Area
2 Ref
3 UNCAL
4 EXT REF
5 Att
6 Day and time
7 Pass/Fail status
8 Marker
9 Trace
10 Marker instruction
11 Marker x value
12 State indication
13 Marker y value
12 T3VNA User Manual
Figure 1-12 User Interface
Description
Area around the waveform display shows additional information
Reference level
When the sweep time is less than the auto couple time, the
measure result may have decreased accuracy, The display will
indicate uncalibrated using the letters "UNCAL"
Valid Ext 10 MHz reference clock detected indicator
Attenuator Value
System time
Limit Pass/Fail status
Current active marker
Active trace
Current marker, touch to open a new marker
Unit: frequency, frequency delta or time
Auto Tune: Automatically sets the optimal parameters
according to the characteristics of the signal.
Currently showing 'Waiting for Trigger'
Amplitude value or amplitude delta value