Connection To Systems Other Than Stratos - Siemens ST950ELV Handbook

Setting the profile to Stratos
Equipment is supplied configured for use in non-Stratos systems. To configure it for
use with Stratos, visit the System – Settings configuration web page and set the
Profile to Stratos.
7.4.7

Connection to Systems Other than Stratos

Security
When set to the Stratos profile and connected to Stratos only, the unit provides
suitable security to allow it to be connected to the Internet. If either of these
conditions is not met (i.e. the Stratos profile isn't selected and / or the unit is
connected to systems other than Stratos e.g. UTC systems) then a suitable analysis
should be performed to ensure that there are no security vulnerabilities in the
network configuration and / or equipment used. The details of this will depend on
the networks and connections involved and is outside the scope of this codument
but the following are examples of what should be considered:
Security classification Unrestricted
Version 7
Last Editor manpreet.jeerh
Document Name ST950 ICM Handbook
Copyright © Siemens plc 2020. All Rights Reserved.
All manuals and user guides at all-guides.com
Mobility is a division of Siemens Plc
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Page 107 of 154
Status Issued
Date January 2020
Document No. 667/HE/45950/000