Table of Contents
Advertisement
Page 224 of 436
Installing the CP PIV to I/O panel cables
NN43021-310
Standard 06.01
Cabling Common Equipment in a Multi Group system
Figure 92
CP PIV Core and Network backplanes
Core backplane
Group 7
Group 6
Group 5
Group 4
Group 3
Group 2
j3
j3
j3
j3
j3
j3
slot 12
slot 12
slot 11
slot 11
slot 10
slot 10
port 1
port 0
port 1
port 0
port 1
port 0
j4
j4
j4
j4
j4
j4
slot 12
slot 12
slot 11
slot 11
slot 10
slot 10
port 1
port 0
port 1
port 0
port 1
port 0
NT4N29 cable
j3 slot 9 port 0
j4 slot 9 port 0
Group 0
Connect the cables from the CP PIV card faceplate to the I/O panel on the
back of the Core/Net modules:
•
COM1 is used to connect a terminal.
•
COM2 is used to connect a modem.
•
LAN 1 is used to connect the system to a LAN switch.
•
LAN 2 is used to connect Core 0 to Core 1 for system redundancy.
Note: If there is no LAN, LAN 1 and LAN 2 are connected from Core 0
to Core 1.This connection is made on the backplane.
March 2013
NT4N89 cable
Network backplane
A B
Group 1
j3
slot 9
port 1
j4
slot 9
port 1
NT4N29 cable
E
System Monitor
(XSM) connections
J3
J2
J1
D
553-9473
Advertisement
Table of Contents
