Table of Contents
Advertisement
Figure 150
ELAN connection on Ethernet port coupler
9
Connect the server to the TLAN subnet.
a.
Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable
(supplied) into the TLAN network interface (TLAN port) on the Server
faceplate.
b.
Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c.
Plug the other end of the Ethernet patch cable into the remaining
Ethernet port coupler mounted in the Ethernet port adapter plate.
d.
Label the Ethernet port coupler as TLAN.
See Figure 151 and Figure 152.
lnstalling a Signaling Server
Large System Installation and Commissioning
Page 403 of 436
Advertisement
Table of Contents
