Table of Contents
Advertisement
Software installation
Follow Procedure 48 to install the software. First install the software on Core/
Net 1, and then repeat the process to install the software on Core/Net 0.
Procedure 48
Installing the software
1
Check that a terminal is connected to COM1 on Call Server 1.
2
Insert the RMD into the Compact Flash card slot.
3
Press the manual RESET button on the CP PIV card faceplate
4
Press <CR> at the Install Tool Menu
Powering up the system and initial loading
Large System Installation and Commissioning
Page 293 of 436
Advertisement
Table of Contents
