Table of Contents
Advertisement
Planning and designating a
Main Distribution Frame
Contents
About terminations
Installation and designation
This chapter contains information about the following topics:
About terminations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation and designation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal block requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the BIX cross-connect terminal. . . . . . . . . . . . . . . . . . . . . . .
Installing the Krone cross-connect system (UK) . . . . . . . . . . . . . . . . .
All Large System terminations are cross-connected on frame-mounted or
wall-mounted modules and connecting blocks. The layout of the blocks can
vary to meet the requirements of the site.
DANGER OF ELECTRIC SHOCK
Tip, ring, A, B, E, M, ESC, and ESCG connections
can be considered to be Telecommunication Network
Voltages (TNV).
Use the manufacturer's documentation for recommendations and detailed
procedures on installing and labelling the cross-connect blocks.
Large System Installation and Commissioning
Page 137 of 436
137
137
138
138
142
Advertisement
Table of Contents
