Trunk Cables Among Network Interface, Sneak Fuse Panel, And Media Gateway - Avaya S8700 Installing

With avaya mcc1 or scc1 media gateways
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

146
Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connect the Media Gateway to the MDF
Trunk Cables Among Network Interface,
Sneak Fuse Panel, and Media Gateway
The 1-pair of Central Office (CO) trunks are installed by the network provider in the green field.
Up to 24 pairs may be terminated on each row of the 110-type terminal block. Tie trunks also
appear in the green field with up to eight 3-pair trunks terminated on each row of the 110-type
terminal block.
WP-90929, List 1 and 3 concentrator cables can be used to connect the media gateway to the
110-type terminal blocks in the purple field. The 1-pair patch cords/jumper wires are then run
from the purple terminal block rows to the green terminal block rows in order to establish the
correct 3-pair modularity.
Equipment Room Cabling Labels
Figure notes
1
2
Equipment Room Labels
Label Name
Port Cable
Building
Floor
Auxiliary Cable
Site or Satellite
Purple Label (Port Cable)
Blue/Yellow Label (Building
and Floor)
Range
1A1-1A20, 1B1-1B20, 1C1-1C20,
1D1-1D20, 1E1-1E20
Field Identified
Field Identified
Field Identified
A-F and/or Field Identified
1 A 2
A
labels LJK 060396
Yellow Label (Auxiliary)
3
4
Blue/Yellow Label (Site or
Satellite)
May 2003

Advertisement

Table of Contents
loading

Table of Contents