Table of Contents
Advertisement
Testing the sysload
Figure 107
Blower unit removal
Use Procedure 54 to test the sysload (manual reload) function.
Procedure 54
Sysload test
1
Start the sysload:
•
Simultaneously press the MAN RST buttons (the bottom buttons) on
both Call Processor Cards.
The following functions occur during a sysload:
•
The red LED at the top of the CPU column should light.
•
The major alarm indication should be displayed on all attendant
consoles.
Performing acceptance tests
Large System Installation and Commissioning
Page 323 of 436
Advertisement
Table of Contents
