Page 168 of 436
NN43021-310
Standard 06.01
Configuring the system monitor
Figure 68
UPS alarm cabling
J4 on system monitor
8
For DC-powered systems, extend the alarm and trip leads from connector
J4 on the system monitor in the column with CPU 0 (the master system
monitor) to the external power equipment using an NT8D46AV cable (see
Table 14 on
page
Note 1: Conduit is not required.
Note 2: An NT8D46BV cable (19.5 m/64 ft) or NT8D46CV cable (30 m/
100 ft) can be used instead of the NT8D46AV cable. Connections are the
same as the NT8D46AV cable.
March 2013
Large System columns
UPS alarm cable
UPS for each column
169).
J4 on system monitor
553-3088