Introduction; Contents; Overview - Avaya 1000M Installation And Commissioning Manual

Introduction

Contents

Overview

This chapter contains information about the following topics:
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avaya Communication Server 1000 task flow . . . . . . . . . . . . . . . . . . .
Summary of procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before a Large System can be installed, a network
assessment must be performed and the network must be
VoIP-ready.
If the minimum VoIP network requirements are not met,
the system will not operate properly.
For information about the minimum VoIP network
requirements and converging a data network with VoIP,
see Converging the Data Network with VoIP
(NN43001-260).
This document describes the procedures used to install and configure a
Large System. For proper installation, perform the steps in the sequence
stated in "Summary of procedures." The summary will refer you to other
sections within this document. After completing the steps listed in those
sections, return to the summary and continue on to the next step.
WARNING
Large System Installation and Commissioning
Page 33 of 436
33
34
37