Table of Contents
Advertisement
3700 Portable Samplers
Section 1 Introduction
1.5.4 Liquid Level Actuator
1.5.5 Master/Slave Cables
1.6 Technical
Specifications
Table 1-1 Technical Specifications for the 3700 Portable Samplers
Physical Size
Dry Weight
Operational Temperature Range
Storage Temperature Range
Control Box
Sampler Base Capacity
Base Insulation
Physical Size
Weight Range
Operational Temperature Range
Storage Temperature Range
Control Box
Inner Sleeve Bottle Options
Base Insulation
1-10
Flowlink when it retrieves sample event data from an Isco flow
meter or flow logger. Because these files are fully compatible
with Flowlink, Flowlink can use the files in its sampling reports
and graphs.
Teledyne Isco's Liquid Level Actuator is used to provide level
sensitive control of the sampler. The actuator can be used as an
alternative to a flow meter.
Master/Slave Interconnect Cable – Connects two 3700 Sam-
plers as master and slave.
3700 Master/Slave to Flow Meter Cable – Connects two 3700
Samplers as master and slave and connects the pair to an
open-channel flow meter.
Technical specifications for the 3700 Standard and Compact
Samplers can be found in the following table.
Standard 3700 Physical Specifications
Height: 25.25 in. (64.1 cm)
Diameter: 19.88 in. (50.5 cm)
37.5 lbs (17.0 kg) with polypropylene bottles
o
o
o
o
32
to 120
F (0
to 50
C)
o
o
o
o
0
to 140
F (-20
to 60
C)
Self-Certified NEMA 4X and 6 ratings
(Submersible, watertight, dust-tight, and corrosion-resistant)
1. Sequential Base: 24 - 350-ml glass or 1000-ml polypropylene bottles, or 1 -
2.5-gallon (9500-ml) glass or polyethylene container.
2. Optional Composite Base: 1 - 4-gallon (15,000 ml) polyethylene container
Standard thermal resistance factor of R-11
Compact 3700 Physical Specifications
Height: 27.6 in. (70.1 cm)
Diameter: 17.75 in. (44.4 cm)
32 lbs (14.5 kg) empty to 62 lbs (28.2 kg) with 24 bottles
o
o
o
o
32
to 120
F (0
to 50
C)
o
o
o
o
0
to 140
F (-20
to 60
C)
Self-Certified NEMA 4X and 6 ratings
(Submersible, watertight, dust-tight, and corrosion-resistant)
1. Sequential Sampling: 24 500-ml polypropylene bottles; 12 300-ml glass bot-
tles; 12 300-ml polypropylene bottles.
2. Optional Composite Sampling: 2.5-gallon glass composite bottle; 2.5-gallon
polyethylene composite bottle.
Standard thermal resistance factor of R-11
Advertisement
Table of Contents
