Table of Contents
Advertisement
3700 Portable Samplers
Section 3 Programming Guidelines
3.15 Extended
Programming
Examples
Example: Time-Paced Sampling: Uniform Intervals
1. Press E
/
NTER
PROGRAM
2. Access the program sequence by selecting "PROGRAM".
3. Select "TIME".
4. Select "UNIFORM".
3-80
Select the preferred language from this display. If you select
French, Spanish, or German, the sampler will automatically
convert English units of measure to metric units and return to
standby. If you select English, a second input display will appear.
Select the units from this display. After you've made the
selection, the sampler will convert the units of measure as
required and return to standby.
Example Time-Paced Sampling: Uniform Intervals shows how to
program the sampler to take time-paced samples at uniform time
intervals of 30 minutes starting at 8:00 a.m. tomorrow, placing
one 500 ml sample in each bottle.
The examples throughout this section demonstrate the steps
used to program the sampler for several different sampling rou-
tines in the extended programming mode. Each programming
example concludes with the run state displays that appear for
that routine.
Note
Before programming a sampler in the extended programming
mode, the sampler must be configured for extended program-
ming. Refer to the section Programming Mode for a discussion
of the Programming Mode configure option. Example Checking
the Configure Option Settings shows the steps required to
access the Programming Mode option.
to access the interactive state.
. . . STANDBY . . .
10:34:50
PROGRAM
[
TIME INTERVALS]
[
TIME
, FLOW STORM]
PACED SAMPLING
[
UNIFORM
TIME INTERVALS
[English, German,
Spanish, French]
[U.S., Metric]
Units
19-JUN-04
, NONUNIFORM
, NONUNIFORM]
Advertisement
Table of Contents
