Table of Contents
Advertisement
3700 Portable Samplers
Appendix D Display Index
This display appears only in the extended programming mode and follows Display #10 when you have selected
"TIME." Select "UNIFORM" for uniform time intervals, "NONUNIFORM" for nonuniform time intervals.
This display appears after you select "PROGRAM" in Display #1. It appears only when the sampler is configured for
the extended programming mode and for 4, 12, or 24 bottles with the 3700 Portable, and 12 or 24 bottles with the
3700 Compact. Select "TIME" for time-paced sampling. Select "FLOW" for flow-paced sampling, and "STORM" for
storm sampling.
This display appears after you select "STORM" in Display #12. Use to select time- or flow-pacing for the second bottle
group of a storm routine. Select "TIME" for time-pacing or "FLOW" for flow-pacing
This display appears after you select "STORM" in Display #12. Enter the amount of time between the sampler's
enabling and the first sample event for the first bottle group occurs.
This display is the first input display of the flow segment of a storm program. Select "DURING" to collect samples for
the first and second bottle groups concurrently. Select "AFTER" to collect samples for the second bottle group after
the sampler has filled the first bottle group.
This display appears after you select "STORM" in Display #12. Enter the amount of time between the time the sam-
pler is enabled and the first sample event for the second bottle group.
This display follows Display #11 when you have selected "NONUNIFORM." Select "YES" to modify the existing non-
uniform intervals. Select "NO" to leave the nonuniform intervals unchanged.
In the basic programming mode, this display appears after you have selected "TIME" in Display #10. In the extended
programming mode, this display appears when you have selected "UNIFORM" in Display #11. Enter the uniform time
interval. You need to make 2 entries: The first entry sets the hours, the second sets the minutes.
This display follows Display #10 when you have selected "FLOW." Enter the flow-pulse interval.
This display follows Display #15. Use this display to enter the number of timed sample events in a storm program.
This display follows Display #23. Enter the time interval between time-paced sample events in a storm program.
D-2
Table D-1 Display Index (Continued)
Display11
[ UNIFORM, NONUNIFORM]
TIME INTERVALS
[ TIME, FLOW, STORM ]
Display 12
PACED SAMPLING
Display14
[ TIME, FLOW ]
SECOND BOTTLE GROUP
Display 15
___ MINUTE DELAY TO
FIRST GROUP SAMPLE
Display 16
[DURING, AFTER]
FIRST GROUP
Display 17
___ MINUTE DELAY TO
SECOND GROUP SAMPLE
Display 20
MODIFY SEQUENCE?
[ YES , NO ]
Display 21
SAMPLE EVERY
-- HOURS -- MINUTES
Display 22
SAMPLE EVERY
---- PULSES ( 1 - 9999 )
Display 23
TAKE -- TIMED
SAMPLE EVENTS (1 - MAX)
Display 24
SAMPLE INTERVALS OF
-- MINUTES (1 - 99)
Advertisement
Table of Contents
