Table of Contents
Advertisement
Example: Reviewing the Sampling Results
1. Press display status to view the results of the sampling program.
2. Select "REVIEW."
3. Select "RESULTS."
4. This display reports the start time and date of the program. Press
keys to move through the results. If the routine
/
ENTER
PROGRAM
was finished at the time you pressed the
last display will report the time and date the routine ended.
Print – Select "PRINT" from Display #148 to send the current
status, program settings, or sampling results to the Teledyne Isco
Field Printer.
Note
The Teledyne Isco Field Printer has been discontinued and is
no longer sold by Teledyne Isco. These instructions are for
customers who still have Field Printers.
For information on the reports produced by the Field Printer,
refer to the Field Printer Instruction Manual.
When you select "PRINT," Display #149 appears. Use this display
to select the settings or results report. (The sampler will
interrupt the reports to take a sample, if necessary.) Select "NO"
to return to standby.
PRINT PROGRAM [
SETTINGS, RESULTS]
The sampler will display one of two messages as it sends the data
to the printer. The first message informs you that the trans-
mission is in progress. The second message is a warning
informing you that the sampler is unable to detect the printer. If
you see the warning message, check the cable connections
between the printer and the sampler.
. . . PRINTING . . .
PROGRAM INFORMATION
PRINT ABORTED
NO PRINTER DETECTED!
DONE . . .
24 SAMPLES
12:34:50
20-JUN-04
[
, PRINT] PROGRAM
REVIEW
INFORMATION
REVIEW PROGRAM [ NO ,
SETTINGS,
RESULTS
3700 Portable Samplers
Section 3 Programming Guidelines
DISPLAY STATUS
NO
,
Display #149
]
/
to advance to the next display.
ENTER
PROGRAM
key, the
3-103
Advertisement
Table of Contents
