Table of Contents
Advertisement
3700 Portable Samplers
Section 3 Programming Guidelines
Example: Checking the Configure Option Settings (Continued)
5. To verify the Bottles and Sizes settings, press the
6. Select "PORTABLE" or "REFRIG" depending upon which model you have. Enter PORTABLE for either the 3700
Standard or Compact.
7. For the purposes of this example, select "24" when you are using the 24-bottle base. Use the arrow keys until "24"
blinks, then press the
ENTER
8. Enter the bottle size here. Enter "350" for the 350 ml glass bottles, "1000" for plastic bottles, for example. Press
the
/
key. If you enter a number that exceeds the maximum standard bottle size (15,000), the
ENTER
PROGRAM
message, "WARNING: STANDARD BTL VOLUME EXCEEDED!," will display for a short time. The sampler will
then prompt you to confirm the volume entered. This prompt is displayed in Step 9.
9. Select "YES" if you want to use the nonstandard bottle volume. Select "NO" if you want to revise the entry. The
display shown in step 8 will reappear; use it to enter the revised bottle volume. Press the
accept the entry and advance to step 10
10. Press the
/
ENTER
PROGRAM
1
/
11. Select "
" if you are using
4
/
key to accept the selection. If you select "
ENTER
PROGRAM
instead you will be prompted for the suction-line length, as shown in step 13. (You do not need to specify vinyl line
1
/
type because only
-inch suction line is available.)
4
12. This display appears when you have selected "
"TEFLON" if you are using TEFLON suction line. Press the
13. Enter the length of the suction line. Do not include the tube coupling or the strainer in the length. Press the
/
key to accept the entry and move to step 14. If you change the suction line settings, the ". . .
ENTER
PROGRAM
CALCULATING . . . PUMP TABLE VALUES" message will appear for a short time
14. Press the
/
ENTER
PROGRAM
18.
3-24
ENTER
SELECT OPTION: (← →)
BOTTLES AND SIZES
PORTABLE
{
SAMPLER
/
key. Select "1" when you are using a single-bottle for composite sampling.
PROGRAM
{1, 4, 12,
BOTTLES
BOTTLE VOLUME IS
1000
1001 ml!
. . . ARE YOU
SURE?
{YES,
key at this display to access the Suction-Line input displays shown in steps 11 to 13.
SELECT OPTION: (← →)
SUCTION LINE
1
/
-inch suction line, "
4
SUCTION LINE ID IS
3/8
{ 1/4,
3
/
" in step 11. Select "VINYL" if you are using vinyl suction line,
8
SUCTION LINE IS
{
VINYL
, TEFLON}
SUCTION LINE LENGTH
IS 10 FEET (3 - 99)
key at this display to access the Liquid Detector input displays shown in steps 15 to
SELECT OPTION: (← →)
LIQUID DETECTOR
/
key. The display shown in Step 5 will appear.
PROGRAM
, REFRIG
24
}
ml
NO
}
3
3
/
/
" if you are using
8
8
1
/
," you will not see the display shown in step 12;
4
} INCH
/
key to accept the selection
ENTER
PROGRAM
/
key to
ENTER
PROGRAM
-inch suction line. Press the
Advertisement
Table of Contents
