Table of Contents
Advertisement
1.3.3 Strainers
1.3.4 Bottle Configurations
3
The
/
inch ID vinyl suction lines are shipped from the factory
8
with our standard weighted polypropylene strainer installed on
one end of the suction line and a tubing coupling on the other
end.
Additionally, Teledyne Isco offers two low flow stainless steel
1
strainers for
/
inch ID and
4
For sampling from highly acidic flow streams, a weighted plastic
CPVC strainer is available.
With the 3700 Standard, a number of sample containers are
available for both sequential sampling and composite conver-
sions:
24 Bottle Configurations:
• 350 ml glass with PTFE lined caps
• 1000 ml polypropylene bottles with polyethylene foam
lined caps
12 Bottle Configuration:
• 950 ml (1 quart) glass with PTFE lined caps (requires 12
bottle base)
• 950 ml (1 quart) polypropylene with polyethylene foam
lined caps (requires 12 bottle base)
4 Bottle Configuration:
• 3800 ml (1 gallon) glass with PTFE lined caps (requires
4 bottle locating insert for 24 bottle standard base
section)
Single Bottle Composite Configurations:
• 9400 ml (2.5 gallon) glass composite bottle with unlined
cap (requires locating insert for 24 bottle standard base
section)
• 9400 ml (2.5 gallon) polyethylene composite bottle with
unlined cap (requires locating insert for 24 bottle
standard base section)
• 15,000 ml (4 gallon) polyethylene composite bottle with
unlined cap.
With the 3700 Compact, the removable inner sleeve holds any of
five different bottle configurations. They are:
24 Bottle Configuration:
• 500 ml polyethylene bottles with polyethylene foam
lined caps
12 Bottle Configurations:
• 300 ml glass bottles with PTFE lined caps
• 300 ml polypropylene bottles with polyethylene foam
lined caps
Single Bottle Composite Configurations:
• 9400 liter (2.5 gallon) glass composite bottle with
unlined cap
3700 Portable Samplers
Section 1 Introduction
3
/
inch ID suction lines.
8
1-7
Advertisement
Table of Contents
