Table of Contents
Advertisement
Example: Sampling with Stops and Resumes (Continued)
6. Enter "15" to set the minutes entry to 15.
7. Enter "1" to set the number of bottles per sample event to 1.
8. Select "SAMPLES."
9. Enter "1" to set the number of samples per bottle to 1.
10. Enter "500" to set the sample volume at 500 ml.
11. Select "YES."
12. Enter the start time and date of the sampling program: 6:00 a.m. tomorrow.
13. Enter "5." There are three stop times and two resume times.
14. Enter the time and date of the first stop time: 8:00 a.m..
15. Enter the time and date the program should resume: 11:00 a.m..
16. Enter the time and date of the second stop time: 1:30 p.m. or 13:30. You must enter the times in military time.
17. Enter the time and date the program should resume: 4:00 p.m. or 16:00 in military time.
18. Enter the time and date the program should resume: 4:00 p.m. or 16:00 in military time.
After this message displays briefly, the sampler will automatically return to the standby state.
19. Press the
START SAMPLING
SAMPLE EVERY
0 HOURS,
10 MINUTES
SAMPLE EVERY
15
0 HOURS,
1
BOTTLES PER
SAMPLE EVENT ( 1 - 24 )
CHANGE BOTTLES BASED
ON [ TIME ,
SAMPLES/BTL
CHANGE BOTTLES EVERY
SAMPLES ( 1 -
1
SAMPLE VOLUMES OF
500
ml
(10 - 1000)
ENTER START TIME?
[
, NO ]
YES
TAKE FIRST SAMPLE AT
06
:00
5
STOP or RESUME
TIMES ( 0-24 )
STOP SAMPLING AT
1.
08:
00 19-JUN
RESUME SAMPLING AT
1.
11
:00 19-JUN
STOP SAMPLING AT
13:
2.
30 19-JUN
STOP SAMPLING AT
13:
2.
30 19-JUN
STOP SAMPLING AT
18
3.
:00 19-JUN
PROGRAMMING SEQUENCE
COMPLETE
key to run the program.
3700 Portable Samplers
Section 3 Programming Guidelines
MINUTES
]
8 )
19-JUN
3-93
Advertisement
Table of Contents
