Programming The Sampler For A Storm Routine; First Section: First Bottle Group Settings - Teledyne 3700 Installation And Operation Manual

3.13 Programming the
Sampler for a Storm
Routine
3.13.1 First Section: First
Bottle Group Settings
The extended programming mode contains two program
sequences. The first sequence contains the displays for time- and
flow-paced routines. The second sequence contains the displays
for STORM paced routines. Figures 3-10 and 3-11 show first
sequence displays; Figure 3-12 shows the STORM displays.
The storm input displays are divided into three sections. The
first section contains the displays that control the pacing and dis-
tribution to the first bottle group. The second section contains
the displays that control the pacing and distribution for the
second bottle group. The third section controls the start time for
the routine and may include calibration and manual suction
head displays.
The first section contains the input displays that:
• Set a delay to the first sample event of the first bottle
group.
• Set the time pacing for the first bottle group.
• Allocate the bottles for the first bottle group.
• Determine sample distribution for the first bottle group:
sequential, samples-per-bottle multiplexing,
bottles-per-sample multiplexing, or multi-bottle compos-
iting.
3700 Portable Samplers
Section 3 Programming Guidelines
3-71