Teledyne 3700 Installation And Operation Manual page 220

Portable samplers
Table of Contents

Advertisement

3700 Portable Samplers
Appendix D Display Index
Tubing Life configure option. This informational display communicates the pump counts elapsed since the last reset
and the counts required to trigger the Pump Tubing Warning. Exit this display by pressing any key.
Display 350
Tubing Life configure option. After changing the pump tube, select "YES" to reset the pump counter to zero. Select
"NO" to leave the counter unchanged.
Display 351
Tubing Life configure option. Enter the number of pump counts required to trigger the pump-count warning if the fac-
tory setting is not suitable. This value is set to 500,000 when the controller is reinitialized.
Display 352
Program Lock configure option. Select "ENABLE" to turn on the program lock. If you enable the program lock, input
displays are protected by a pass-number: 3700. The controller will not allow you to make any changes to a program
or configure sequence setting until you enter the pass-number when requested. Select "DISABLE" to turn the pro-
gram lock off.
Display 360
Sampler ID configure option. Enter the sampler identification here. The sampler will accept as many as 10 characters,
including periods (press resume sampling), dashes (press manual sample), and spaces (press start sampling).
Display 365
Run Diagnostics configure option. Select "YES" to run the distributor test. Select "NO" to skip the test. Test the distrib-
utor by moving it to Position 24 then back to Position 1.
Display 370
Run Diagnostics configure option. Select "YES" to "reinitialize" (reset) the controller: the entire RAM – with the excep-
tion of the configure option settings for current pump-count total, number of bottles, bottle size, suction-line length,
and sampler ID – will be reset to factory settings. Select "NO" the leave the settings unchanged.
Display 371
D-10
Table D-1 Display Index (Continued)
------ PUMP COUNTS,
WARNING AT ------
--- POST-SAMPLE
COUNTS ( 0 - 9999 )
------ PUMP COUNTS
TO WARNING
[ ENABLE , DISABLE ]
PROGRAM LOCK
SAMPLER ID NUMBER IS
----------
TEST DISTRIBUTOR?
[ YES , NO ]
RE-INITIALIZE?
[ YES , NO ]

Advertisement

Table of Contents
loading

Table of Contents