Table of Contents
Advertisement
DECLARATION OF CONFORMITY
Application of Council Directive:
Equipment Type/Environment:
Standards to which Conformity is Declared:
Standard
EN61000-4-2
Electrostatic Discharge
EN61000-4-3
Radiated RF Immunity
EN61000-4-4
Electrical Fast Transient
EN61000-4-5
Surge on AC Lines
EN61000-4-6
Conducted RF on AC lines
EN61000-4-11
Voltage Dips/Short Interruptions
CISPR11/
RF Emissions
EN 55011
EN61000-3-2, 3-3
Harmonic, Flicker
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of April 25, 1996.
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-3703-246
Rev D
89/336/EEC – The EMC Directive
Manufacturer's Name:
Teledyne Isco, Inc.
Manufacturer's Address:
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
Trade Name/Model No:
Model 3700 Sampler with 923 or 946 power source
Year of Issue:
1996
EN 61326-1998 EMC Requirements for Electrical Equipment for Measurement,
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control,
Description
Control, and Laboratory Use
and Laboratory Use
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 1000MHz 80% AM at 1kHz
Level 1 - 10V/m
Level 2 - 2kV on ac lines
2kV common mode, 1kV differential mode
150 kHz to 80 MHz, 3V rms, 80% modulated
0.5 cycle, each polarity/100%
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Performance Criteria
A
A
A
A
A
A
A
Advertisement
Table of Contents
