User Properties; User Name; Area Assignment - Bosch solution 6000 Installation Manual

U S E R P R O P E R T I E S
This section outlines user properties including User Name,
Area Assignment, User Options, TimeZone Access, Door
Assignment, and Expire Date.
Access > User Properties >

User Name

U s e r 1 N a m e
This menu allows the installer or a master user to program
the user's name (max of 20 characters). This name is used
for system greetings, reporting and log entries to identify
the user by name.
1) Enter [MENU] + [1] + [4] + [0] and use the up and
down arrows to highlight the user in the list then
press [OK].
Ur1 User 1 Name
Ur2 User 2 Name
Ur3 User 3 Name

Press OK or MENU
2) Use the arrow and number keys to move and
change text. When the user name is complete,
press [OK]. At any time you can press the [OFF] key
to clear the text from the current cursor position to
the end of the line.
User Name Ur1
User 1 Name
Press  OK to SAVE
See Alpha Text Programming in Section 4 —
i
Programming Overview for further detail on entering
Note
alpha text.
Bosch Security Systems 07/14 BLCC610I
-
  MENU 1-4-0
Solution 6000
Installation Manual

Access > User Properties >

Area Assignment

1 Security System
2 Area 2 Name
3 Area 3 Name
4
Area 4 Name
5 Area 5 Name
6 Area 6 Name
7 Area 7 Name
8 Area 8 Name
This menu allows the installer or master user to program
which areas (1 to 8) other users can access. Each user can
be assigned to one or multiple areas.
The master user can only assign other users to any one
or multiple areas that the master user itself has been
assigned to. At factory default, each user is assigned to
operate Area 1.
1) Enter [MENU] + [1] + [4] + [1] and use the up and
down arrows to highlight the user in the list then
press [OK].
Ur1 John Smith
Ur2 Debbie Smith
Ur3 User 3 Name

Press OK or MENU
2) Use the up and down arrow keys to highlight the
option then press the [ON] key to enable or the
[OFF] key to disable.
 Security System
Area 2 Name
Area 3 Name

Press OK ON OFF MENU
3) Repeat Step 2 until you have assigned the user to
all required areas, then press [OK] to save and exit,
or press [MENU] to exit without saving.
Access Programming

-
  MENU 1-4-1
Y
N
N
N
N
N
N
N
5-7