Auto Arming An Area Using A Timezone; Unlocking A Door And Disarming Area 1 Using A Lan Reader; Unlock A Door And Arm/Disarm Area 1 Using A Lan Reader; Using Cli To Establish Upload/Download Connection - Bosch solution 6000 Installation Manual

Solution 6000
Installation Manual


Auto Arming an Area using a Timezone

The control panel can be configured to automatically arm
and or disarm an area automatically if required using a
Timezone.
Procedure
1) To setup an Auto Arming time, select a timezone
that is not being used, and program the timezone
name in MENU 7-5-0 to something convenient.
2) Set the timezone period start time in MENU 7-5-1
for the arming time you require. The stop time
should be set to 12:00am or --:--am, which prevents
the system from auto disarming.
3) Set the timezone period day in MENU 7-5-2 for the
days of the week you require the area to
automatically arm.
4) Set the timezone that you want the area to follow
in MENU 2-1-8.
5) Set the global Auto Arm Pre Alert time (default = 10
minutes) in MENU 2-8-4.
The auto arm pre alert time will commence when the
i
timezone stop time occurs. When the auto arm pre
Note
alert time has finished, the area(s) will automatically
turn on.
Unlock a Door using a LAN Reader
This example assumes LAN Reader 9, Door Assignment 4 ,
User 1 and Output 5 are being used.
Procedure
1) Assign LAN Reader 9 to Door Assignment 4 in
MENU 6-1-7.
2) Set output 5 to Event type to 60 - Door in MENU
4-1-1 and the output Door Assignment to 4 in
MENU 4-1-2. Set the output Polarity in MENU 4-1-3
and the output Time Parameter in MENU 4-1-4 as
required.
3) Assign the user to Door 4 in MENU 1-4-5. Users can
belong to multiple doors.
4) Assign the LAN Reader Home Area to 0 (All Areas)
in MENU 6-1-3 and then disable Options 1, 2, 3 & 4
in MENU 6-1-2.
5) Program the Door Assignment for User 1 in MENU
1-4-5 as 4.
6) Add a token to User 4 in MENU 1-2-0.
7) Exit programming mode and present the token to
the LAN reader to access the door.
12-2
Programming Examples

Unlocking a Door and Disarming Area 1 using a LAN
Reader
This example assumes LAN Reader 9, Door Assignment 4 ,
User 1 and Output 5 are being used.
Procedure
1) Assign LAN Reader 9 to Door Assignment 4 in
MENU 6-1-7.
2) Set output 5 to Event type to 60 - Door in MENU
4-1-1 and the output Door Assignment to 4 in
MENU 4-1-2. Set the output Polarity in MENU 4-1-3
and the output Time Parameter in MENU 4-1-4 as
required.
3) Assign the user to Door 4 in MENU 1-4-5. Users can
belong to multiple doors.
4) Assign the LAN Reader Home Area to 1 (Area 1) in
MENU 6-1-3 and then disable Options 1, 2 & 4 in
MENU 6-1-2.
5) Program the Door Assignment for User 1 in MENU
1-4-5 as 4.
6) Add a token to User 4 in MENU 1-2-0.
7) Exit programming mode and present the token to
the LAN reader to access the door.
Unlock a Door and Arm/Disarm Area 1 using a LAN
Reader
This example assumes LAN Reader 9, Door Assignment 4 ,
User 1 and Output 5 are being used.
Procedure
1) Assign LAN Reader 9 to Door Assignment 4 in
MENU 6-1-7.
2) Set output 5 to Event type to 60 - Door in MENU
4-1-1 and the output Door Assignment to 4 in
MENU 4-1-2. Set the output Polarity in MENU 4-1-3
and the output Time Parameter in MENU 4-1-4 as
required.
3) Assign the user to Door 4 in MENU 1-4-5. Users can
belong to multiple doors.
4) Assign the LAN Reader Home Area to 1 (Area 1) in
MENU 6-1-3 and then disable Options 2 & 4 in
MENU 6-1-2.
5) Program the Door Assignment for User 1 in MENU
1-4-5 as 4.
6) Add a token to User 4 in MENU 1-2-0.
7) Exit programming mode and present the token to
the LAN reader to access the door.

Using CLI to establish Upload/Download Connection

Calling Number Identification is a feature provided by
your teleco line provider that can help you identify who is
calling by displaying the caller's phone number.
This feature is used by the control panel to identify the
telephone number that the upload download computer
is calling from. When the control panel verifies that the
Bosch Security Systems 07/14 BLCC610I