Channel Configuration Options - Paradyne 3160-A3 Operator's Manual

C. Configuration Options
Table C-3. Network Interface Configuration Options (3 of 3)

Channel Configuration Options

The Channel configuration options are divided into two tables as follows:
T
T
C-10
Circuit Ident:
Next Edit Clear Prev
Network Circuit Identifier. Specifies the transmission vendor's circuit identifier for the
purpose of facilitating troubleshooting. The network circuit identifier is an ASCII text string
that may be up to 255 characters in length.
Edit – Allows you to edit and/or display the network circuit identifier using the generic text
string entry screen.
Clear – Allows you to clear the network circuit identifier. The network circuit identifier is set
to a null string.
DTE Channel Configuration Options
Data Port Channel Configuration Options
NOTE:
Table C-4, DTE Channel Configuration
Channel Configuration
channel configuration options. The configuration options in
Channel Configuration
port is enabled and you are using a 2-port or 4-port DSU/CSU.
February 2001
(Table C-4)
(Table
Options, and
Options, describe the DTE channel and data port
Options, only appear if the DTE Drop/Insert (DSX-1)
C-5)
Table C-5, Data Port
Table C-4, DTE
3160-A2-GB21-90