Disconnecting The Modem Connection - Paradyne 3160-A3 Operator's Manual

3. Operation

Disconnecting the Modem Connection

The Disconnect command enables you to force a disconnect of an active modem
connection from the front panel of the DSU/CSU. This command is only available
when the DSU/CSU modem is connected.
Disconnect methods include:
T
T
Procedure
To disconnect an established modem connection using the Disconnect command:
3-60
Using the Disconnect command via the front panel menu (for all dial
connections, or when a pass-through connection is established to another
316x DSU/CSU).
Pressing and holding the
pass-through connection is established to a remote device other than a
316x DSU/CSU).
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
Control:
Call Rel
F2
F1
4. From the Call Setup screen, select Disc.
Call Setup:
Disc ChDir
F2
F1
The modem call is disconnected and the Command Complete screen
appears.
Disconnect:
Command Complete
F1 F2
February 2001
and front panel keys simultaneously (when a
key until the Ctrl selection
LED
F3
F3
F3
3160-A2-GB21-90