Changing User Interface Access Security - Paradyne 3160-A3 Operator's Manual

3. Operation

Changing User Interface Access Security

Procedure
To change user interface access security:
3-68
1. Press the key two times from the top-level screen.
DSU ESF
Stat Test
F1 F2
2. Press the key three times.
DSU ESF
Stat Test
F1 F2
3. Press the key once.
DSU ESF
Stat Test
F1 F2
The Security screen appears.
Security:
Lvl1 Lvl2
F1 F2
4. Press F1 to select Lvl1, or press F2 to select Lvl2. After you make a selection,
the top-level screen appears.
If you do not make a selection within 5 minutes, the Automatic Device
Health/Status screen appears.
February 2001
Cnfig
F3
Cnfig
F3
Cnfig
F3
F3
3160-A2-GB21-90