Resetting The Dsu/Csu; Download Operations - Paradyne 3160-A3 Operator's Manual

Resetting the DSU/CSU

Use the Reset command to perform a power-on reset of the DSU/CSU.
Procedure
To reset the DSU/CSU:

Download Operations

3160-A2-GB21-90
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
on the screen.
4. Select Reset.
Control:
ClrReg Reset
F2
F1
5. From the Device Reset screen, press F1 to initiate a reset of the DSU/CSU
(the power-up sequence screen appears). Press F2 instead to return to the
Control screen without initiating a reset.
Device Reset:
Yes No
F2
F1
NOTE:
The Download command is for use by service personnel only. Loss of primary
data could result from improper use.
February 2001
key until the Ctrl selection
key until the Reset selection appears
F3
F3
3. Operation
3-65