Selecting/Copying To A Specific Port - Paradyne 3160-A3 Operator's Manual

3. Operation

Selecting/Copying to a Specific Port

For the DSU/CSU, you have the capability of selecting a specific port to configure,
and then (for 2-port and 4-port DSU/CSUs) copying the configuration options from
that port to another port (or to all ports).
Procedure
To select a specific port to configure:
3-18
NOTE:
The following procedure is an example only. Screen displays may vary
depending on the model and configuration of the DSU/CSU.
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, select Port.
Edit:
DTE Port
F1 F2
5. From the Port Select screen, press the Function key that corresponds to the
port you want to configure. Use the
screen, if necessary. Configure the port (see
Options ).
Port Select:
Copy Prt1
F1 F2
February 2001
NET
F3
key to scroll addition ports onto the
Appendix C, Configuration
Prt2
F3
3160-A2-GB21-90