Paradyne 3160-A3 Operator's Manual page 139

Displaying DSU/CSU Test Status
Use the Test Status command to display the active tests for the DSU/CSU. Status
messages that can display on the front panel LCD are listed in
Status
Procedure
To display test status:
3160-A2-GB21-90
Message.
1. From the top-level menu screen, select Stat.
2. From the Status screen, press the
the screen.
3. Select TStat.
Status:
STest Perf
F2
F1
The Test Status screen appears showing you what tests are active for the
DSU/CSU.
February 2001
key until the TStat selection appears on
TStat
F3
4. Maintenance
Table 4-10, Test
4-37