Paradyne 3160-A3 Operator's Manual page 264

H. Asynchronous Terminal Operation
Displaying LED Conditions
The same conditions monitored by the front panel LEDs can also be monitored by
the Display LEDs screen. This screen is most useful when the DSU/CSU is being
accessed remotely.
Procedure
To display LED conditions:
The screen shows a snapshot of the LEDs every 5 seconds. LEDs that are
illuminated are displayed by inverse video.
Select Refresh to update the screen.
Figure H-4.
H-8
1. From the Main Menu screen, select Status.
The Status screen appears.
2. From the Status screen, select Display LEDs.
The Display LEDs screen appears
Screen).
main/status/leds
Customer ID: Node A
Slot: xx
GENERAL NETWORK
OK Sig
Fail OOF
Test Alm
EER
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Refresh
Example of Display LEDs Screen
February 2001
(Figure H-4, Example of Display LEDs
DISPLAY LEDs
DTE PORT 1 PORT 2
Sig DTR DTR
OOF TXD TXD
Alm RXD RXD
PDV CTS CTS
BPV RTS RTS
Model: 31xx
PORT 3 PORT 4
DTR DTR
TXD TXD
RXD RXD
CTS CTS
RTS RTS
MainMenu Exit
3160-A2-GB21-90