Table of Contents
Advertisement
3. Operation
Displaying DS0 Channel Assignments
Use the Display command (in the Channel Configuration branch) to view how the
DS0 channels are currently allocated.
Line 1 of the display shows the 24 channels of the selected interface. Pressing the
displays what is allocated to the DS0 channel listed in Line 1. Symbols used in the
display are shown in
Table 3-5.
Procedure
To display the DS0 channel allocation:
3-36
NOTE:
The following procedures are examples only. Screen displays may vary
depending on the model and configuration of the DSU/CSU.
or
key scrolls the channels onto the screen in groups of three. Line 2
Table 3-5, Display Channel
Display Channel Symbols
Symbol
Meaning
–
The DS0 channel is not allocated.
Prt n
The DS0 channel is allocated to Port n , where n is 1, 2, 3, or 4.
N n
The DS0 channel is allocated to the network interface DS0 channel n ,
where n can be any number from 1 through 24.
D n
The DS0 channel is allocated to the DTE Drop/Insert (DSX-1) interface
DS0 channel n , where n can be any number from 1 through 24.
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Chan.
Edit:
Port
NET
F1
February 2001
Symbols.
key until the Chan selection appears on
Chan
F2
F3
3160-A2-GB21-90
Advertisement
Table of Contents
