Establishing Access Security On A Port - Paradyne 3160-A3 Operator's Manual

3. Operation

Establishing Access Security on a Port

Although the password feature is available, it is not required as a factory default. If
used, it ensures access security before device control is passed to a device
connected to a port. The password configuration option can be individually set for
the COM or MODEM port, or both if security is needed on both port types. The
default is None. The password itself is set separately (refer to the following
section,
Procedure
To establish access security on a port:
3-48
5. Select Gen.
Edit:
NET Chan
F1 F2
6. Press F1 (Next) to display the next configuration option (Clock Src).
7. Select the master clock source. For external, press the
selection appears on the screen.
8. Select Ext (external timing).
Clock Src:Ext
Prt1 Int
F1 F2
9. Select the appropriate external clock rate by pressing the corresponding
Function key. This step is mandatory if you have chosen external clocking.
Clock Rate:1544
Next 2048
F1 F2
Setting a Password
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
screen.
February 2001
Gen
F3
Ext
F3
1544
F3
on page 3-49).
key until the User selection appears on the
key until the Ext
3160-A2-GB21-90