Displaying Or Editing Configuration Options - Paradyne 3160-A3 Operator's Manual

Changing Configuration Options
Use the Configuration branch of the main menu to display or change DSU/CSU
configuration options. Refer to
Operation , and
If the access level is not Level 1, the message Access level is 2,
Configuration is read-only is displayed on line 24.

Displaying or Editing Configuration Options

Procedure
To display or edit configuration options:
Figure H-5.
3160-A2-GB21-90
Appendix C, Configuration Options
1. From the Main Menu screen, select Configuration.
The Load Configuration From screen appears
Screen).
main/config
Customer ID: Node A
Slot: xx
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Configuration Load Screen
February 2001
H. Asynchronous Terminal Operation
Changing Configuration Options
.
(Figure H-5, Configuration Load
LOAD CONFIGURATION FROM:
Current Configuration
Customer Configuration 1
Customer Configuration 2
Default Factory Configuration 1
Default Factory Configuration 2
in Chapter 3,
Model: 31xx
MainMenu Exit
H-9