Table of Contents
Advertisement
Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on a Port
Unless you specify otherwise, the password is null.
Procedure
To set a password:
Once a password is saved, the Login Records Saved message appears at the
bottom of the screen.
main/control/admin_password
Customer ID: Node A
Slot:
xx
Save
Password
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
Figure H-9.
3160-A2-GB21-90
1. From the Main Menu screen, select Control.
The Control screen appears.
2. From the Control screen, select Administer Password.
The Password Entry screen appears
This screen is used to add a new password or modify an existing password.
3. Enter a new password in the Password field.
The password may be 1 to 8 characters long and may contain the characters 0
through 9, a through z, and/or A through Z.
4. Use the Re-Enter Password field to verify the new password.
5. Select Save.
PASSWORD ENTRY
Password:
Re-Enter Password:
Setting a Password
February 2001
H. Asynchronous Terminal Operation
on page H-12), the password itself is set.
(Figure H-9, Setting a
Password).
Model: 31xx
MainMenu
Exit
Enter New
Password
Re-enter
Password
H-13
Advertisement
Table of Contents
