Test Jacks - Paradyne 3160-A3 Operator's Manual

Test Jacks

For 2-port and 4-port DSU/CSUs, six test jacks are located on the front panel
(Figure 4-1, Test Jacks (Standalone
menu tree allows you to select either EQPT (Equipment) or NET (Network).
The 2-port and 4-port DSU/CSU test jack functions are shown in
Jack Block
Figure 4-1.
Procedure
To change the Mon (Monitor) selection in 2-port and 4-port DSU/CSUs:
3160-A2-GB21-90
Diagram, and described in
NET MON EQPT
In In In
Out Out Out
496-14808
Test Jacks (Standalone DSU/CSU)
1. From the top-level menu, press the
the screen.
2. Select Ctrl.
3. From the Control screen, press the
the screen.
4. Select Mon.
Control:
Passwd Mon
F2
F1
5. From the Mon Jack screen, press F1 to select EQPT (the default), or press F2
to select NET.
Mon Jack: EQPT
EQPT NET
F2
F1
February 2001
DSU/CSU)). The Mon (Monitor) branch of the
Table 4-7, Test Jack
key until the Ctrl selection appears on
key until the Mon selection appears on
F3
F3
4. Maintenance
Figure 4-2, Test
Functions.
4-17