Far End Group, Ds1/E1 Mib - Paradyne 3160-A3 Operator's Manual

E. SNMP MIB Objects
Near End Group – The DS1 Interval Table Objects (dsx1IntervalEntry)
The following DS1 interval table objects are provided for the network interface only.
Objects in the table that are not listed are not supported and will return an error
status if access is attempted.
T
T
T
T
T
T
T
Near End Group – The DS1 Total Table Objects (dsx1TotalEntry)
The following DS1 total table objects are provided for the network interface only.
Objects in the table that are not listed are not supported and will return an error
status if access is attempted.
T
T
T
T
T
T

Far End Group, DS1/E1 MIB

The DS1 Far End Group consists of the following three tables:
T
T
T
These tables are not supported for either the network or DTE Drop/Insert (DSX-1)
interface.
E-18
dsx1IntervalIndex – The index that identifies the T1 interface.
dsx1IntervalNumber – The interval number (1 to 96).
dsx1IntervalESs – Errored Seconds for the interval.
dsx1Interval SESs – Severely Errored Seconds for the interval.
dsx1IntervalUASs – Unavailable Seconds for the interval.
dsx1IntervalCSSs – Controlled Slip Seconds for the interval.
dsx1Interval BESs – Bursty Errored Seconds for the interval.
dsx1TotalIndex – The index that identifies the T1 interface.
dsx1TotalESs – The 24-hour total Errored Seconds.
dsx1Total SESs – The 24-hour total Severely Errored Seconds.
dsx1TotalUASs – The 24-hour total Unavailable Seconds.
dsx1TotalCSSs – The 24-hour total Controlled Slip Seconds.
dsx1TotalBESs – The 24-hour total Bursty Errored Seconds.
DS1 Far End Current
DS1 Far End Interval
DS1 Far End Total
February 2001 3160-A2-GB21-90