Deactivating The Alarm Relay For Carrier-Mounted Dsu/Csus - Paradyne 3160-A3 Operator's Manual

3. Operation

Deactivating the Alarm Relay for Carrier-Mounted DSU/CSUs

The Alarm Cut-off command forces a deactivation of the alarm relay on the
3000 Series Carrier during an alarm condition. Since this function only affects the
3000 Series Carrier, it is only available for carrier-mounted DSU/CSUs. The alarm
relay function must first be enabled by the Alarm Relay configuration option (refer
to
Procedure
To deactivate the alarm relay:
3-64
Appendix C, Configuration Options
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select ACO.
Control:
ACO Rel
F2
F1
4. The Command Complete screen appears.
Alarm Cut-Off:
Command Complete
F2
F1
February 2001
).
key until the Ctrl selection
LED
F3
F3
3160-A2-GB21-90