Paradyne 3160-A3 Operator's Manual page 185

Table C-10. Management Trap Configuration Options (3 of 3)
3160-A2-GB21-90
Trap I/F: All
Next NET DTE T1s
Link Trap Interfaces. Specifies which interfaces generate linkUp and linkDown trap
messages. These traps are supported on the T1 interfaces (network and DTE
Drop/Insert) and the synchronous data ports.
NET – Sends trap messages for linkUp and linkDown events occurring on the network
interface.
DTE – Sends trap messages for linkUp and linkDown events occurring on the DTE
Drop/Insert (DSX-1) interface. This selection does not appear if the DTE Drop/Insert
(DSX-1) interface is disabled.
T1s – Sends trap messages for linkUp and linkDown events occurring on the network or
DTE Drop/Insert (DSX-1) interface.
Ports – Sends trap messages for linkUp and linkDown events occurring on the
synchronous data ports.
All – Sends trap messages for linkUp and linkDown events occurring on the network
interface, DTE Drop/Insert (DSX-1) interface, or the synchronous data ports.
NOTE: This configuration option is not available if the Link Trap configuration option is
not configured to generate trap messages for linkUp or linkDown events.
February 2001
Ports All Prev
C. Configuration Options
C-41